How to Scan for Digital Terrestrial Channels in Ghana – In Ghana, digital channels are received using an antenna, and they can be found using digital receivers that are compatible with them.
A mode of communication that is limited to the handling of digital signals only. For any voice or video signal to be transmitted over a digital channel, it must first go through the process of being converted from analog to digital.
How to Scan for Digital terrestrial Channels in Ghana
Make sure that your antenna is properly connected to the jack on the back of your TV before attempting to scan for digital channels on any TV set. The jack is located behind the TV.
When you are absolutely certain of this, proceed with caution and follow the steps below:
To access the menu on your remote, press the “Menu” button. Utilizing the left and right arrow keys, you can navigate through the menu.
After that, select the “Channel Settings” option.
Make sure you hit the “Enter” button on your remote.
By using the down arrow, choose “DTV Manual Tuning.”
To access the DTV Manual Tuning Submenu, press Enter. Click “All Channels” and then hit “Enter” When your scan is finished,
press “Menu” to go back or “Exit” to leave.
The list of Free to Air Digital Channels are;
GTV SportPlus
GBC
GTV
Max TV
Onua TV
Obonu TV
TV3
TV Africa
Crystal TV
Viasat 1
E-TV Ghana
Viasat-1
Net-2 TV
Top TV
UTV
Coastal TV
Cardinal TV
Light TV
Kantanka TV
How to Scan for Digital Terrestrial Channels in Ghana
How to Rescan Your TV Antenna
Your remote’s menu button should be pressed.
Look for the channel setup option in the TV’s menu.
the tuner or the antenna.
launch a fresh scan.
How to Scan (or Rescan) For Channels
Make sure your TV is connected to an antenna.
Your remote control’s “Menu” button should be pressed.
The “Channel Scan” option should be located and chosen on your TV’s menu.
Search the TV’s “Settings,” “Tools,” “Channels,” or “Options” menu if you can’t find the “Channel Scan” option.
What is the frequency of digital TV channels in Ghana?
Set the channel to channels 28 and 29 in the channel settings to scan quickly. A signal bar showing the signal’s strength will appear. Before pressing scan on the remote to access the digital terrestrial channels, turn the antenna until you get a strong signal.